Woom 4, 5, and 6 Assembly Guide
Tools Needed
- 4 mm Allen wrench (included)
- 15 mm wrench (included)
Step 1: Unbox Your Woom Bike
- Carefully remove all parts from the box.
- Ensure you have the following components:
- Frame with rear wheel attached
- Handlebar
- Front wheel
- Saddle with seat post
- Pedals
- Allen wrench
- 15 mm wrench
Step 2: Insert the Handlebar
- Insert the handlebar into the stem.
- Ensure the handlebar is centered and aligned properly with the front fork.
Step 3: Secure the Handlebar
- Use the 4 mm Allen wrench to tighten the stem bolts.
- Make sure the handlebar is firmly secured and aligned correctly.
Step 4: Install the Front Wheel
- Position the front wheel into the front fork.
- Ensure the wheel is centered in the fork.
Step 5: Secure the Front Wheel
- Use the 15 mm wrench to tighten the axle nuts.
- Spin the wheel to ensure it is properly aligned and spins freely.
Step 6: Insert the Seat Post
- Insert the seat post into the frame.
- Adjust the seat height to your child's preference.
Step 7: Secure the Seat Post
- Tighten the seat clamp using the 4 mm Allen wrench.
- Ensure the saddle is level and properly aligned.
Step 8: Identify the Pedals
- Identify the pedals: The pedals are labeled "L" for left and "R" for right.
Step 9: Attach the Pedals
- Screw the right pedal clockwise into the right crank arm.
- Screw the left pedal counterclockwise into the left crank arm.
Step 10: Secure the Pedals
- Use the 15 mm wrench to tighten the pedals securely.
Final Checks
- Ensure all bolts are securely tightened.
- Check the alignment of the handlebars, wheels, and saddle.
- Test ride the bike to ensure everything is working correctly.